SolarEdge wi-fi kit Guide D'installation page 9

8
Scroll down to the Server Status screen, and check the Wi-Fi
status.
S e r v e r : W i - F i
S t a t u s :
If OK is not displayed, or there is an error/status message, refer
to Appendix A of the Wi-Fi Kit Installation Guide.
9
Scroll down to the Wi-Fi Status screen, and check the Wi-Fi
settings.
10 Wait for the inverter to connect to the SolarEdge monitoring
portal. This may take up to two minutes.
A message similar to the following appears on the LCD panel:
V a c [ v ]
2 4 0 . 7
S_OK: Indicates that the connection to the SolarEdge
monitoring portal is successful. If S_OK is not displayed, refer to
Appendix A of the Wi-Fi Kit Installation Guide.
11 Close the inverter cover as described in its manual.
12 Turn the inverter ON/OFF switch to ON.
MAN-01-00166-1.1
SolarEdge Wi-Fi Kit Quick Installation Guide
V d c [ v ]
5 . 2 V
< S _ O K >
< S _ O K >
< O K >
P a c [ w ]
0 . 0
O F F
7