Videofied XL200 Notice D'utilisation page 8

Disarming your system after an alarm
Alarm Meaning
: Tamper (The enclosure of a device has been open).
: Intrusion.
: Technical issue.
You must validate the info and touch
On the red display
which caused the alarm or the technical issue
0 => for the panel
1 à 19 => Number of the device in question.
You must then validate the device and touch
1. From the keypad integrated in the panel
Put your hand on the keypad for activation, the back
light turns on.
Enter your access code and confi rm with
The panel emits four rapid bips indicating there was
an alarm.
2. From the badge reader
integrated in the panel
Present the badge in front of the panel and match
the badge logo with the panel logo. Wait for the two
bips. Your system is off.
The panel emits four rapid bips indicating there was
an alarm.
is indicated the N° of the device.
ENGLISH
or
4