Associated Standards And Regulations - LABBOX V05 Serie Mode D'emploi

For materials which are not listed, please request information from manufacturer/supplier.
•
Before using other method for cleaning or decontamination, the user must ascertain with the
•
manufacturer/supplier whether this method will not harm the instrument.
Wear the proper protective gloves during cleaning of the instrument.
•

7. Associated Standards and Regulations

8. Specifications
Note:
• Electrical instruments may not be
placed in the cleansing agent.
• The instrument is a sophisticated
electronic product; please avoid severe
shaking during use and transportation.
• The instrument must be cleaned and
put it into the initial packaging carton
before
contamination.
• Switch OFF the instrument and put it
in a dry, clean, stable place at room
temperature in long-term disuse.
Construction in accordance with the following
safety standards:
EN 61010-1
Construction in accordance with the following
EMC standards:
EN 61326-1
Associated EU guidelines:
EMC-guidelines: 2004/108/EC
Instrument guidelines: 73/023/EWG
Items
Voltage [VAC]
Frequency [Hz]
Power [W]
Shaking movement
Orbital diameter [mm]
Motor type
Motor rating input [W]
Motor rating output [W]
sending for service,
Specifications
220-230 / 110-120
50, 60
orbital
Shaded-pole motor
7
avoid
60
4
58
10