Chapter 2 Installation; Operating Principle; Installing The Product - Gamko MG 000030098 Mode D'emploi

Hint! Never install the refrigerator next to a heat source!
A refrigerator works by extracting heat from the space to be refrigerated and to release this in the
surrounding area.
For maximum air circulation it is recommended to allow at least 10 cm space around the refrigerator.
Be very careful never to obstruct the air inlets and outlets.
Place the product on a smooth surface.
1 Place the product at his position.
2 Make sure the product is standing level using a spirit level.
3 The product must be placed with feet to provide adequate air circulation around the cabinet. This for an
optimal operation of the product and to dispose a possible leakages of R600a. Also, the legs are used for
product adjustment and leveling.
24

Chapter 2 Installation

Operating principle

Installing the product