Pattfield PE-AB 36 Li Basic Traduction De La Notice Originale page 116

Protection from environmental infl uences
1. Wear suitable work clothes. Wear safety gog-
gles.
2. Protect your cordless tool and the battery
charger from moisture and rain. Moisture
and rain can cause dangerous cell damage.
3. Do not use the cordless tool or the battery
charger near vapors and infl ammable liquids.
4. Use the battery charger and cordless tools
only in dry conditions and an ambient tempe-
rature of 10-40°C.
5. Do not keep the battery charger in places
where the temperature is liable to reach over
40°C. In particular, do not leave the battery
charger in a car that is parked in the sunshine.
6. Protect batteries from overheating. Over-
loads, over-charging and exposure to direct
sunlight will result in overheating and cell
damage. Never charge or work with batteries
which have been overheated – replace them
immediately if possible.
7. Storage of batteries, battery chargers
and cordless tools. Store the charger and
your cordless tool only in dry places with an
ambient temperature of 10-40°C. Store your
lithium-ion battery pack in a cool, dry place at
a temperature of 10-20°C. Protect them from
humidity and direct sunlight. Only place fully
charged batteries in storage (charged at least
40%).
8. Prevent the lithium-ion battery pack from free-
zing. Battery packs which were stored below
0°C for more than 60 minutes must be dispo-
sed of.
9. When handling batteries beware of electro-
static charge: Electrostatic discharges cause
damage of the electronic protection system
and the battery cells. Avoid electrostatic char-
ging and never touch the battery poles.
Special safety information
•
Read the operating instructions carefully.
Familiarize yourself with the operator controls
and proper operation of the machine.
•
Never allow children or other persons who
are not familiar with the operating instructions
to use the equipment. Contact your local
governmental agency for information regar-
ding minimum age requirements for the user.
•
Never work in the direct vicinity of persons -
especially children - or animals.
•
Always keep in mind that the machine opera-
tor or user is responsible for accidents invol-
ving other persons and/or their property.
Anl_PE_AB_36_Li_Basic_SPK7.indb 116 Anl_PE_AB_36_Li_Basic_SPK7.indb 116
GB
Preliminary measures
•
Always wear sturdy, non-slip footwear and
long trousers when using the machine. Never
use the machine barefoot or in sandals.
•
Check all the ground on which the machine
will be used and remove all objects that could
be caught up and violently flung out by it.
•
Before using the machine, always visually ex-
amine the tools for excessive wear or dama-
ge. To prevent any imbalance, replace worn
out or damaged parts and mounting bolts as
a set only.
•
Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
Handling
•
Only use the machine in broad daylight or in
well-lit conditions.
•
Always maintain good footing on inclines.
•
Only operate the machine at a walking pace.
•
Work perpendicular to the slope, never up or
down it.
•
Be particularly careful when you change di-
rection on a slope.
•
Do not work on overly steep inclines.
•
Be particularly careful when you turn the ma-
chine around or pull it toward yourself.
•
Switch on the motor carefully as described
in the instructions from the manufacturer and
ensure that you keep your feet at a safe dis-
tance from the tool.
•
Never move your hands or feet toward or un-
der any rotating parts.
•
Never lift or carry a machine whilst the motor
is running; in addition the safety plug should
be pulled out.
•
Switch the motor off whenever leaving the
machine.
•
If the machine begins to experience unusual
vibrations, switch it off immediately and check
it.
Maintenance and storage
•
Make sure that all nuts, bolts and screws are
tightened securely at all times to ensure that
the machine is in safe working condition.
•
Allow the engine to cool down before you put
the machine in an enclosed area.
•
For safety reasons, replace worn or damaged
parts.
•
Always switch the machine off and unplug the
safety plug before making any adjustments or
cleaning it.
•
Switch off the engine and pull the safety plug
- 116 -
24.11.2017 06:31:46 24.11.2017 06:31:46