Baking Waffles - Buffalo DK229 Mode D'emploi

UK
Operation
Upper plate
Lower plate
Handle
Timer dial
HEAT Indicator light

Baking waffles

1. Close the plates. Then connect the appliance to the mains power supply. (If necessary, the batter
collection tray can be laid on the base to catch any dripping batter.)
Note: It may be necessary to slightly grease the plates with cooking oil before baking
•
depending on the foodstuff.
2. Turning on: Set the power switch to I position.
3. Set the thermostat to the desired temperature. The HEAT indicator light turns on.
4. When the set temperature is reached, the HEAT indicator light turns Off. (Note: During use, the
HEAT indicator light keeps on and off, indicating the set temperature is being kept.)
5. Lift the upper plate and pour the waffle batter on the bottom plate. Then close the upper plate.
6. Turn the both plates clockwise 180 degrees using the handles until locked into place again. This
ensures even spreading of the batter on both plates.
7. Set the timer dial to the desired baking time.
8. When the cooking time expires, the appliance gives an audible beep.
9. Turn the appliance to its original position and lift the upper plate. Remove the baked waffles with a
heat-proof wooden/plastic spatula.
10. After use: Set the thermostat to MIN and power switch to O. Then disconnect from the power
supply.
Tips for baking waffles
• Do not pour too much batter as excess batter might drip out of the plates during baking.
• Ideal baking time depends on many factors, like batter amount, batter thickness, ingredients, etc.
• Browning level also depends on many factors, like batter ingredients, baking time, room temperature,
etc. Sugary batter, for example, will turn brownish faster.
• Avoid opening the plate repeatedly during baking, otherwise the waffles may stick on the plates or
not bake at all.
4
DK229_ML_A5_v1_20211129.indb 4 DK229_ML_A5_v1_20211129.indb 4
Power switch
Base
Batter collecting
Thermostat
tray
2021/11/29 11:33 2021/11/29 11:33