Honeywell CLEARFLOW 3 Notice D'utilisation page 4

FLUID DRAINS
Water contained in pneumatic systems will be collected in the filter housing bowls. These bowls must therefore be drained regularly.
The system includes 2 manual drains beneath the filtration assemblies. Fluids can be drained by turning the drain valve anti-clockwise when
the system is unpressurised. The drain is closed again by turning the valve clockwise.
COMPRESSOR
For the Clearflow 3 system to provide breathable quality air, it is important that the compressor, or its air inlet, is situated in a clean,
uncontaminated environment (usually outside, away from sources of contamination such as traffic fumes, chemicals, confined spaces, etc.).
The compressor must be inspected and serviced regularly, and its filters changed following the manufacturer's instructions.
MAXIMUM FLOW RATE CAPACITY
The Clearflow 3 system can supply breathable air for up to 4 operators using facemasks, or up to 2 operators using facemasks at the same
time as additional tools such as hand-held paint spraying equipment.
SPARE PARTS (Figure 1)
Item Part number
1 1763341 Isolating valve
2 1763923 Wall mounting bracket for regulator
3 1763922 Ring for regulator mounting bracket
4 1763926 Filter head connector (with 2 O-ring gaskets)
5 1763925 Filter head connector with wall bracket (with 2 O-ring gaskets)
1763924 5 O-ring gaskets
6 1763921 Filter blocking indicator (available as a service/repair kit)
7 1763914 Regulator (complete, without pressure gauge)
8 1001707 Pressure gauge
9 1001722 Quick connector (CEJN for Airvisor)
9 1763420 Quick connector (RBE 06)
9 1763422 Quick connector (AQR 06)
9 1763920 Quick connector (double-action for Airvisor 2 DHC)
10 1763928 Coalescing filter assembly (complete, supplied with connector)
1763908 Coalescing filter
11 1763916 Activated carbon filter assembly, complete
1763907 Activated carbon filter element
12 1763927 Filter housing bowl (with manual drain)
13 1017050 Skid (complete with fixing bolts)
1005060 Connecting kit for Airvisor (includes a 'Y' piece + one CEJN connector)
1763335 RBE connecting kit (includes a 'Y connector + one RBE 06 connector)
1763333 AQR connecting kit (includes a 'Y connector + one AQR 06 connector)
1763929 Dual action connecting kit (includes a 'Y connector + one dual action connector)
WARNING
The Clearflow 3 system does not remove CO or CO
Description
EN-2
2