Specification - Aim TTi TGR6000 Manuel D'instructions

FREQUENCY
Frequency Range:
Setting Resolution:
Accuracy and Stability:
Phase Noise:
Residual FM:
Switching Speed:
REFERENCE FREQUENCY
Internal Reference Accuracy:
Internal Reference Stability:
10MHz Reference In/Out:
External Reference IN:
Internal Reference OUT:
OUTPUT LEVEL
Output Level range:
VSWR
Settling Time:
Setting Resolution:
Accuracy:
Harmonically Related Signals:
Sub-harmonically Related
Signals:
10MHz – 6000MHz
10Hz
see Reference Frequency
500MHz Carrier :
<-110dBc/Hz (typ) @ 20kHz offset
<-120dBc/Hz (typ) @ 100kHz offset
3GHz Carrier:
<-95dBc/Hz (typ) @20kHz offset
<-110dBc/Hz (typ) @100kHz offset
6GHz Carrier:
<-89dBc/Hz (typ) @ 20kHz offset
<-104dBc/Hz (typ) @100kHz offset
12 Hz @ 500MHz – Equivalent peak deviation in a 300Hz to 3.4kHz
bandwidth.
<8ms to settle within 100Hz or 0.1ppm of final frequency, if greater.
<± 1ppm, 15ºC – 30ºC
<± 2ppm, 5ºC – 40ºC
<1ppm/year
Rear panel BNC; can be disabled when not required for input or
output.
10MHz, 50Ω input impedance, 2 – 5Vpp
Automatic detection and selection when external reference signal is
present and Reference IN is selected from front panel.
Front panel indicator shows when External Reference is active.
10MHz, 50Ω output impedance, >2Vpp into 50Ω
Signal present when Reference OUT is selected from front panel.
–110dBm to +7dBm
> -18.0dBm < 1.7:1 (typ)
<= -18.0dBm < 1.5:1 (typ)
<8ms to settle to within 0
0.1dB, 0.01uV –1mV
± 2dBm
<-25dBc @ +7dBm, <-30dBc@levels <=0dBm 30 – 6000MHz
≤3000MHz : None
>3000MHz :<–40dBc (typ) @ +7dBm.
.
2dB
<-25dBc@levels <=0dBm 10 – 30MHz

Specification

3