CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
To assure the finest performance,
please read this manual carefully. Keep
it in a safe place for future reference.
2
Install these units in a well ventilated,
cool, dry, clean place — away from
direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow
ventilation space of at least 10 cm on
the top, bottom, left and right. Also
make sure the rear of these units is not
touching the opposite wall.
3
Locate these units away from other
electrical appliances, motors, or
transformers to avoid humming sounds.
4
Do not expose these units to sudden
temperature changes from cold to hot,
and do not locate these units in an
environment with high humidity (i.e. a
room with a humidifier) to prevent
condensation inside these units, which
may cause an electrical shock, fire,
damage to these units, and/or personal
injury.
5
Avoid installing these units where
foreign objects may fall onto these units
and/or these units may be exposed to
liquid dripping or splashing. On the top
of these units, do NOT place:
– Other components, as they may
cause damage and/or discoloration
on the surface of these units.
– Burning objects (i.e. candles), as they
may cause fire, damage to these
units, and/or personal injury.
– Containers with liquid in them, as
they may fall and liquid may cause
electrical shock to the user and/or
damage to these units.
6
Do not cover these units with a
newspaper, tablecloth, curtain, etc. in
order not to obstruct heat radiation. If
the temperature inside these units rises,
it may cause fire, damage to these units,
and/or personal injury.
7
Do not plug these units into a wall outlet
until all connections are complete.
8
Do not operate these units upside-
down. They may overheat, possibly
causing damage.
9
Do not use force on switches, knobs
and/or cords.
10 When disconnecting the power cord
from the wall outlet, grasp the plug; do
not pull the cord.
11 Do not clean these units with chemical
solvents; this might damage the finish.
Use a clean, dry cloth.
12 Only the voltage specified on these
units must be used. Using these units
with a higher voltage than specified is
dangerous and may cause fire, damage
to these units, and/or personal injury.
YAMAHA will not be held responsible
for any damage resulting from use of
these units with a voltage other than
that specified.
13 To prevent damage by lightning,
disconnect the power cord from the wall
outlet during an electrical storm.
14 Do not attempt to modify or fix these
units. Contact qualified YAMAHA
service personnel when any service is
needed. The cabinet should never be
opened for any reason.
15 When not planning to use these units
for long periods of time (i.e. when going
on vacation), disconnect the AC power
plug from the wall outlet.
16 Be sure to read the
"TROUBLESHOOTING" section in the
MCX-C15 Owner's Manual or MCX-CA15
Owner's Manual on common operating
errors before concluding that one or
both of these units are faulty.
17 Before moving these units, press
on the MCX-C15 to place them in the
sleep mode, and disconnect the AC
power plug from the wall outlet.
18 Be sure to use the AC adaptor
(LSE0215C1240) supplied with the
MCX-C15. Using an AC adaptor other
than the one provided may cause fire or
damage to these units.
19 These units are designed for home use
only. Never use these units in a car, etc.
Doing so may cause these units to
malfunction.
i