Eton mobius Mode D'emploi page 9

CHARGING THE MOBIUS
VIA MICRO-USB CABLE
The Mobius can be charged using the iPhone's charging
block or through a computer USB port. Insert the micro-usb
cable in the iPhone charging block and plug into wall.
Charging will occur with the standby switch in either
position. While charging the Mobius via usb, to achieve
a full charge cycle, wait until all 4 LEDs are lit.
NOTE: It is highly recommended that you only use the
iPhone's charging block to charge the Mobius via the
micro-usb cable. This allows for the quickest time to
fully charge the Mobius.
CHARGING THE MOBIUS
VIA THE SOLAR PANEL
To charge the Mobius via the solar panel, simply place
the solar panel side in direct sunlight. Charging will occur
with the standby switch in either position. When checking
the solar charging LED indicator, make sure the standby
switch is in the ON position.
NOTE: Please be advised that if the Mobius is to be left under
the sun to charge, the iPhone should be taken out of the
Mobius case. The Mobius may be warm to the touch after
leaving in direct sunlight, please use caution when handling.
iPhone CHARGING
The iPhone starts charging once it is inserted and the
STANDBY switch is turned ON. The iPhone may be placed
back into the case after the Mobius is charged.
7