MV Agusta F4 2011 Mode D'emploi page 141

WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral, the
motorbike stationary with your feet on the
ground. Do not change the display while dri-
ving.
Press "OK" for less than four seconds to set the first
digit of the code.
4
Press "OK" for less than four seconds to set the first
digit between 0 and 9.
Once the digit has been selected, press "OK" for
over four seconds to confirm the first digit of the code.
Now, you can set the second digit of the code.
Do the same to set the other four digits of the code.
OPERATION
- 54 -
4