Lega G120 Manuel D'instructions page 10

1.4 DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE 1.4 DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE 1.4 DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE 1.4 DIRECTIONS / RECOMMENDED AND NOT RECOMMENDED USE
This machine should be exclusively used for honey transfer purposes.
This pump is not suitable for liquids at temperatures higher than 70°C, nor for pressures higher than 5 bar.
This pump may not be used to treat flammable fluids and is not suitable for operating in explosion risk
environments.
2. 2. 2. 2.1 HANDLING / TRANSPORT 1 HANDLING / TRANSPORT 1 HANDLING / TRANSPORT 1 HANDLING / TRANSPORT
The machine is generally stable and does not require any special loading or handling precautions.
It is mounted on a trolley which makes handling easier but at the same time, requires machine fixing with
ropes during transportation.
The wheels are fitted with a brake, it should be blocked when the machine is in position.
2.2 INSTALLATION 2.2 INSTALLATION
2.2 INSTALLATION 2.2 INSTALLATION
The pump is equipped with a connecting cable (approximate length: 3 m) with a plug ready for plugging into a
220V 50Hz single-phase current outlet or a 380V 50Hz three-phase current outlet.
The cable should only be plugged into an electric socket up to safety standards. The connecting value is
1100W.
For extra safety, always provide a differential switch with 30mA release current upstream from the machine;
the electric line must be protected by a 16A automatic valve.
The trolley-mounted pump can be positioned anywhere in the workshop, preferably next to a honey source.
Always make sure that the power cable and the pipes conveying honey do not hinder other operations and
above all, do not imply a risk of stumbling in the passage areas for workshop operators.
The pump can turn in both directions of rotation and either end opening can be indifferently used as an inlet or
outlet.
If the pump is used to transfer honey from a honey extractor outlet, always interpose a filter to prevent wood
or metal fragments (e.g. nails, bits of frame wire etc. produced during the centrifugation phase) from reaching
and damaging the pump impeller.
2.3 DESCRIPTION 2.3 DESCRIPTION 2.3 DESCRIPTION 2.3 DESCRIPTION
Our impeller pump is especially suitable for thick liquids including honey.
Thanks to the remarkable characteristics of this pump, honey can be conveyed without being altered by
shaking: this is achieved thanks to the slow-rotation neoprene impeller operation.
The pump rotation speed is controlled by inverter, from 40 rpm corresponding to approx. 800 kg/h of product
transferred, to 240 rpm corresponding to approx. 4000 kg/h, with 5 m head.
The pump body is made from food-grade AISI 304 stainless steel. The impeller is made from synthetic
material – completely non-toxic and acid-resistant. Honey can be pumped even if it contains solid matters
without causing any damage or machine stops.
Instant priming can be indifferently controlled from either outlet, according to the motor direction of rotation.
The electric motor/pump assembly, is mounted on a trolley with rubber wheels. It is complete with an
electronic inverter for rotation speed and reverse control.
LEGA LEGA
LEGA LEGA
srl srl srl srl
C C C C ostruzioni ostruzioni A A A A pistiche ostruzioni ostruzioni
www.legaitaly.com - - - - Tel 054626834 www.legaitaly.com www.legaitaly.com www.legaitaly.com
pistiche – – – – via Maestri del Lavoro 23 pistiche pistiche via Maestri del Lavoro 23 – – – – 48018 Faenza via Maestri del Lavoro 23 via Maestri del Lavoro 23
Tel 054626834 – – – – Fax 054628279 Tel 054626834 Tel 054626834 Fax 054628279 – – – – P.iva 00043230390 Fax 054628279 Fax 054628279
48018 Faenza 48018 Faenza 48018 Faenza
P.iva 00043230390 P.iva 00043230390 P.iva 00043230390
10 / 28