Safety Instructions; Inserting/Replacing Batteries - Renkforce A260 Mode D'emploi

Operating instructions
Kitchen thermometer
Item no. 1052380
Intended use
The kitchen thermometer is intended for use as an insertion or an immersion thermometer in
the home.
It can be used to measure the temperature of foods, liquids or other products into which the
thermometer can be inserted or immersed.
The indicator head with the display is splash-proof. Only the probe point may be immersed in
liquids.
The product is not dishwasher-safe.
The power is to be supplied by a battery only (for type, see "Technical data").
Any use other than that described above is not permitted and can damage the product. In ad-
dition, it can lead to hazards such as short-circuit, fire, etc.
Read the operating instructions carefully and keep them for later reference.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Contents
• Kitchen thermometer
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Features
• Measuring the temperature of foods, snacks, drinks and other products in the home
• Easy-to-read liquid crystal display
• Data hold function
• Stainless steel probe tip
• Automatic cut-off function
• Powered by a button cell
Explanation of the symbols
This symbol indicates specific risks associated with handling, function and use.
The arrow symbol indicates special tips and operating information.

Safety instructions

First, read the complete operating manual carefully, as it contains important
information about the proper operation.
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any resulting
damage!
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions! In such
cases, the warranty will be null and void!
• For safety reasons, any unauthorised conversion and/or modification to the prod-
uct is not permitted.
• The thermometer is not a professional measuring device. Please use high-quality
measuring equipment if you need high measurement accuracy.
• The manufacturer does not accept any liability for incorrect or inaccurate readings
or any consequences resulting from such readings.
• The indicator head is not suited to the high temperatures that the probe tip can
measure. Placing the whole thermometer, e.g. in a baking oven, is not permitted.
• The thermometer is not suited for use in a microwave.
• Avoid subjecting the device to severe mechanical stress. Do not subject it to
strong vibrations.
• This product is not a toy and must be kept out of the reach of children.
• Do not leave packaging materials unattended. It may become a dangerous play-
thing for children.
• Handle the product with care, it can be damaged by impacts, blows, or accidental
drops, even from a low height.
• Also observe any further safety instructions in the individual sections of this op-
erating guide.
• If you have any doubts about the correct operation, or the safety of the product,
please consult a specialist.

Inserting/replacing batteries

Batteries should be kept out of the reach of children.
Do not leave the batteries lying around in the open; there is the risk that they
will be swallowed by children or pets. If they are swallowed, consult a doctor
immediately.
Leaking or damaged batteries can cause burns if they come into contact with
the skin. You should therefore wear suitable protective gloves.
Batteries/rechargeable batteries must not be short-circuited, opened or
thrown into a fire. There is a risk of explosion!
Do not recharge normal, non-rechargeable batteries; there is a risk of explo-
sion! Only charge rechargeable batteries that are intended for this purpose;
use a suitable battery charger.
Please pay attention to the correct polarity (plus/+ and minus/-) when inserting
the battery.
• Open the battery compartment cover on the back of the indicator head by turning the cover
with a coin in the direction OPEN.
• If necessary, remove the flat battery.
• Insert a 1.5 V button cell (LR44), with the correct polarity. The plus pole must point towards
the battery compartment cover.
• Close the battery compartment cover again by laying it in place and turning it with a coin in
the direction CLOSE. Make sure that the sealing ring under the battery compartment cover
is correctly located.
• When the "Lo" indicator flashes along with a battery symbol in the display, the battery is flat
and must be changed.