HP PL5072N Guide De L'utilisateur page 15

TV (rear) Description
Service Port
■ Used for repair
purposes only.
Serial RS-232
■ Used for commercial
purposes only.
ANT/Cable In
■
Connect a coaxial cable
from an off-air antenna or
cable signal source.
Standard For each AV connector set:
Definition Input:
■
AV1: S-Video
■
In, Video In,
and Audio In L
and R
Or
AV2: S-Video
■
■
In, Video In,
and Audio In L
and R
(Audio In L and R connectors
are shared within the AV
connector set.)
!
Do not connect video cables to both the
S-Video In and the Video In connectors.
TV (rear) Description
High Definition Connect component video
Input: cables and left-right audio
cables from optional
1: Component
■
equipment. Supports 480i,
In Y, Pb, and Pr,
480p, 720p, and 1080i
and Audio In L
analog standard and
and R
high-definition format
2: Component
■
inputs. The TV automatically
In Y, Pb, and Pr,
determines what has been
and Audio In L
connected. Some set-top
and R
boxes must be set for a
specific output resolution.
Connect an S-Video
cable and left-right
audio cables from
optional equipment.
Connect a composite
video cable and left-
right audio cables from
optional equipment.
TV (rear) Description (Continued)
Digital High Supports 480i, 480p,
Definition Input: 720p, 1080i, and 1080p
digital format inputs. The TV
HDMI 1 with
■
automatically determines
HDMI Audio
what has been connected.
In L and R
Some set-top boxes must
HDMI 2
■
be set for a specific
resolution out.
HDMI 3 (select
■
models only)
For each HDMI
(High-Definition Multimedia
Interface) connector:
Connect an HDMI cable
from optional digital, high-
definition equipment.
For HDMI 1 with HDMI
Audio Input: Connect a DVI
cable and DVI-to-HDMI
converter from optional DVI
equipment and connect left-
right audio cables to HDMI
Audio In L and R.
PC Input: Connect a VGA cable and
an audio cable from your
VGA
■
PC (Line Out) to use the TV
Audio L/R
■
as a monitor.
Audio Output: For sound to an external
audio system:
Digital
■
(Optical) Connect an optical
■
cable for digital sound
Audio Output
■
out to an optional
L and R
external digital audio
system.
Connect left-right audio
■
cables for stereo sound
out to an optional
external (analog) audio
system. Use the left
(white) connector for
mono sound (single
cable).
AC In
■ Connect the included AC
power cord.
NOTE: Use only the
provided power cord.
Getting to Know Your TV
5