Motion Detection - Blaupunkt BP 2.2 FHD Notice D'emploi Et D'installation

G.
In video Standby mode, long press
mode. Short press
then press
DCIM and LOCKED folders to view videos and photos. If you want to delete the file, long
press
options. Long press
Note: Protection will lock/unlock a file manually. Once the file is locked, it won't be
overwritten while the DVR is in loop recording and can only be deleted manually.
H.
In case of emergency braking or a collision, the G-sensor will be activated to save and
protect the current video clip from being overwritten automatically and will be shown
with a
Three setting options are available (High, Medium & Low). Medium is most recommen-
ded.
I.
In video standby mode, long press
turn on motion detection. When DVR detects a moving object, it starts to record au-
tomatically. If there is no movement in front of the lens for 20 seconds, DVR will stop
recording automatically and go into Standby mode until movement is detected.
When motion detection ON, the icon
press
Note: Once motion detection is turned ON, it will take around 20 seconds to be acti-
vated to work.
Blaupunkt BP 2_2 Manual All Languages 04.indd 31
Playback and Delete
UP/MENU key and
OK key to start or pause. Long press
UP/MENU key to enter into the menu. Select from File delete and Protection
UP/MENU key to go back to previous menu.
G-Sensor
key and G-sensor icon that appears at the top middle of the screen.

Motion Detection

OK key while in recording mode to turn OFF motion detection.
DOWN/MODE key twice to enter into playback
DOWN/MODE key to select the file and
OK key to switch between
UP/MENU key to go to the video menu and
is displayed on the screen. Short
FUNCTION
13.08.2021 11:51:06