B.
With 12V car charger (provided)
Note: While the DVR is plugged in to the 12V charger, the charging indicator will be
steady RED. Once it is fully charged, the charging indicator will switch OFF.
C.
It is recommended that while inserting
the micro SD card into the provided slot,
no force is to be applied. Once it is deter-
mined that the micro SD card has been
inserted the correct side, we suggest that
the card be pushed down till it locks into
position in the slot.
Removing micro SD card: Briefly push
down on the top of the micro SD card
until it is released from it's locked positi-
on and then pull it out (It is suggested to
remove the micro SD card when the DVR
is in OFF mode).
Blaupunkt BP 2_2 Manual All Languages 04.indd 29
Battery Charging
Inserting Micro SD Card
FUNCTION
13.08.2021 11:51:06