The Ins And The Outs - Samson Audio RESOLV 65a Manuel Du Propriétaire

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Operating the RESOLV 65a

RESOLV 65a Control Panel - continued

MID PRESENCE CONTROL

The four-position Mid Presence control switch is used to adjust the mid-range response (in 3dB incre-

ments), providing customized voicing from hi-fi to aggressive mid-range, near-field monitoring. There

are many mix engineers that prefer the sound of near field monitors that have an aggressive midrange

response. In a typical recording, the mid range is often where many parts of the music compete for the

same frequency range. Having a slight 'bump" is like having a microscope on the heavy traffic area.

You'll find that the change is very subtle. The best way to set the controls is what sounds good to you.

Therefore, you should experiment with the various settings to find the combination of the Mid-Presence

and Volume controls you like. To do this play several CD's of music that you are familiar with. Remember, if

you think you're getting lost, the Resolv 65a is flat when the Presence control is set to the "0" position.

VOLUME CONTROL

T h e

v o l u m e

used to adjust the overall output

level of the Resolv 65a. When oper-

ating the unit for the first time, start

with the volume control set all the

way off. Slowly raise the Volume

control to reach a comfortable lis-

tening level.

The Ins and The Outs

The RESOLV 65a features a full comple-

ment of input connectors providing

easy installation with a variety of audio

devices like recording consoles, hard

disk recorders, CD players and comput-

er sound cards, to name a few. The fol-

lowing section details the Resolv 65a's

input connectors. In addition, there is a

detailed cable-wiring diagram on page

12.

BALANCED XLR AUDIO INPUT

The Resolv 65a features a female

XLR connector that will accept bal-

anced or unbalanced +4dBm line level signal. If you are using a mixer that has balanced outputs on XLR

connectors, you can make the connections via standard XLR (microphone) cable.

6 7

1/4-INCH PHONE AUDIO INPUT – A balanced TRS (Tip, Ring, Sleeve) 1/4-inch phone plug is used to con-

nect balanced or unbalanced line level signals. The 1/4-inch input is a switching jack, so when a 1/4-inch

connector is inserted into the jack, the RCA and/or XLR inputs are switched off and the 1/4-inch input is

switched on. This provides a convenient patch point for quick insertion of a secondary signal source for

testing or expanded operation.

6 7

RCA AUDIO INPUT – The RCA input accepts unbalanced signals used to connect signals from unbalanced

–10dBV devices.

6 7

c o n t r o l

6 7

�

��

�

��

6 7

�

��

6 7

��

�

��

6 7

��

6 7

��

6 7

��

Table des Matières

The Ins And The Outs - Samson Audio RESOLV 65a Manuel Du Propriétaire

Les langues disponibles

The Ins and The Outs

Manuels Connexes pour Samson Audio RESOLV 65a

Contenu connexe pour Samson Audio RESOLV 65a

Table des Matières