English; Safety Instructions; Technical Characteristics - Ega Master 60005 Manuel D'instructions

ENGLISH

Attention! Be careful.
1. The pressure created could lead to serious injury.
2. Respect general safety instructions, use protective footwear and eyewear.
3. Check that pressure hoses are free from obstruction and damage. If necessary, replace only with
original spare parts.
4. Check inlet filter before performing any testing operation.
5. If you don't use the pump for a long time, and/or in low temperature countries, put a small
amount of anti-freeze solution inside the pump. This will extend the gasket working life.
6. The pump is made for transplant works, repairs and water installations. The liquids that can be
used should have maximum1.5mPas viscosity and use water solutions between 7 and 12 pH.
Capacity
Pressure
Hose connection
Weight
6

SAFETY INSTRUCTIONS

TECHNICAL CHARACTERISTICS

12 l/min
COD.60005 ___60 bar=860Psi
COD.60009 ___100 bar=1440Psi
1/2"
8 Kgs.