14.3 Operating Instructions
caso Ultraschall-Reinigungsgerät
Open the lid, and fill the stainless steel tank with water.
Attention
Running without water may damage the unit!
Place the item into the water. The item should be immerged
well into water.
However, do not exceed the "MAX" mark.
Close the lid and plug in the appliance.
Press the ON button to start the cleaning process – the red
indication light turns on.
Note
During cleaning, you can hear the ZIZI sound; it means the
unit is working
The unit will stop automatically after 3 minutes. If another
cleaning is needed, press the ON button again.
You can press the OFF button during the cleaning if you want to
stop it.
When the cleaning is finished, unplug the unit and open the lid.
Take out the item. At last, pour the water from the stainless
steel tank and wipe it out.
43