Safety Instructions; Technical Data - Meec tools 010988 Mode D'emploi

EN

SAFETY INSTRUCTIONS

• Always take basic safety precautions
including the following when using
battery powered products to reduce the
risk of fire, battery leakage, personal
injury and/or material damage.
• Never attempt to open the battery.
• Do not store the battery where the
temperature can exceed 40°C.
• Recycle used batteries in accordance with
local regulations.
• Do not burn batteries.
• Extreme conditions can result in battery
leakage. Wipe off any fluid leaking from a
battery with a cloth, and avoid skin contact.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Battery
Screen (backlit)
Power consumption, operation
Temperature range
Resolution
Precision, conductivity measuring
Ambient temperature*
Ambient temperature**
Humidity
Automatic power-off***
Protection rating
* Operation, ** Transport and storage
*** After 2 minutes of inactivity
10
4 x 1.5 V AAA (LR03)
LCD
10 mA
0 to 40˚C
0.1%
±2%
0 to 40˚C
-10 to 50˚C
max 80% RH
Yes
IP20
DESCRIPTION
1. Protective cover
2. Measuring tips
3. Moisture quotient
4. Ambient temperature
5. Detection mode
6. Selection of temperature unit and
Max/Min value
7. Mode selector button
8. Power switch (On/Off)/Lock button
9. Light off/on
FIG. 1
USE
Inserting the battery
1. Open the battery cover on the back of the
product.
2. Insert four 1.5 V batteries size AAA with
the correct polarity.
3. Close the flap.
STARTING AND SWITCHING OFF
Press the power switch to start the moisture
meter and press the button for 3 seconds to
switch it off.
SCREEN LIGHTING
Move the power switch on the side of the
product to switch on the lighting.
SELECTION OF TEMPERATURE UNIT
Press the °C/°F button to switch between
showing the temperature in °C and °F.
MAX / MIN VALUE
Press the button °C/°F for 3 seconds to show
the maximum and minimum measured value.