Bluetooth Telephone; Connection Menu Operation - Pioneer MVH-P8200BT Mode D'emploi

Section
03 Operating this unit
1 Press M.C. to display the setting mode.
2 Select a file.
The following operations are available. The operat-
ing method is the same as that for the basic op-
erations. Refer to Basic Operations on page 24.
! Selecting a folder
! Selecting a file
! Searching every 10 files
Pause (pause)
! Refer to Pause (pause) on page 19.
Random (random play)
! Refer to Random (random play) on page 22.
Play Mode (repeat play)
! Refer to Play Mode (repeat play) on the previous
page.
Capture (capturing an image in JPEG files)
! Refer to Capture (capturing an image in JPEG
files) on the previous page.
Rotate (picture rotation)
! Refer to Rotate (picture rotation) on the previous
page.
Wide Mode (switching the wide mode)
! Refer to Wide Mode (switching the wide mode)
on the previous page.
Time Per Slide (slideshow interval time setting)
! Refer to Time Per Slide (slideshow interval time
setting) on the previous page.
Note
When the USB or SD source is selected, this unit
cannot view still images on USB/SD as a
slideshow.
26
En

Bluetooth Telephone

This function is available only for MVH-
P8200BT.
For details on basic operations after connect-
ing to a cellular phone, refer to Using Blue-
tooth telephone on page 13.
! PIN code is set to 0000 as the default. You
can change this code. Refer to PIN Code
(PIN code input) on the next page.

Connection menu operation

Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Display the phone menu.
Refer to Basic menu operations on page 12.
2 Use M.C. to select Connection.
Turn to change the menu option. Press to se-
lect.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Device List (connecting or disconnecting a cellular
phone from the device list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to connect.
3 Press and hold M.C. to switch the BD address
and device name.
4 Press M.C. to connect the selected cellular
phone.
While connecting, the circular indicator flashes.
To complete the connection, check the device
name (MVH-P8200BT) and enter the link code on
your cellular phone. If the connection is estab-
lished, a circular indicator appears next to the de-
vice name.
Delete Device (deleting a cellular phone from the de-
vice list)