Night Mode Function - Duux Edge Manuel Utilisateur

NOTICE
• The following applies to the Cabin mode.
- The product makes a beep sound.
- The number "30" starts flashing on the
display.
3. Press the increase button
button and select the desired duration of
Y
the schedule in days – 1 to 30 days.
- Wait for 3 seconds.
- The set number stops flashing and lights up
for 2 seconds, showing that the chosen value
is confirmed.
- The product returns to awake mode.
- The schedule icon
to indicate that the schedule function is
activated.
NOTICE
• Press the thermostat button
current set temperature of the schedule.
• Pressing the thermostat button
change the temperature setting.
7.5.3. Adjusting the temperature of a
schedule
To overwrite the temperature of a schedule, see
chapter Setting the temperature.
Adjusting the temperature via the thermostat
function temporarily overwrites the set
temperature of the schedule without deactivating
the schedule function. The overwritten
temperature remains until the start of the next
time slot of the preset schedule.
or decrease
T
lights up on the display
to check the
O
does not
O
The thermostat icon and the schedule icon
light up on the display to show that a temporary
change in temperature is made while the
schedule function is active.
7.5.4. Deactivating a schedule
1. Press and hold the schedule button
seconds.
- The product makes a beep sound.
- The schedule icon
display anymore to indicate that the schedule
function is deactivated.
7.5.5. Custom schedules
It is possible to change the predefined time
slots and the default high and low temperatures
of the schedules in the Duux app. Make sure
the product is connected to Wi-Fi - see chapter
Wi-Fi and Duux app operation
instructions.

7.6. Night mode function

When the product is in night mode, the display is
at half of the brightness and the sound signal of
the product is deactivated.
7.6.1. Activating the night mode
1. Press the night mode button
- The product makes a beep sound.
- The night mode icon
display to indicate that the night mode
function is activated.
- The display dims to half of the brightness.
for 3
P
is not shown on the
– and follow the
.
U
lights up on the
23