showing that the chosen value is confirmed.
- The product returns to awake mode.
- The thermostat icon
display to indicate that the thermostat
function is activated.
NOTICE
• When the heater is actively heating to maintain
the set temperature, the heating icon
on the display.
• The thermostat function can be combined with
the timer function.
7.3.2. Open window detection
When a sudden drop of 5˚C in temperature
within 10 minutes is detected, the product will
stop heating to prevent unnecessarily heating.
The product suspects an open window nearby.
The product makes a long beep sound and all
the function icons on the display turn off. The
display shows the word "OPEN" continuously for
1 minute.
During the 1 minute wait, press any button to
cancel the product from entering standby mode.
The product will resume the current function
settings.
After 1 minute, the product makes a beep sound
and enters standby mode while the word "OPEN"
remains on the display.
Press the power button
into awake mode.
20
lights up on the
lights up
to return the product
R
7.4. Timer function
The timer function can be used in two ways:
• Turn on timer: Turns on the product
automatically at a chosen time. After a set
amount of time, the product enters awake
mode.
• Turn off timer: Turns off the product
automatically at a chosen time. After a set
amount of time, the product enters standby
mode.
NOTICE
• The timer function can be used without a day and
time being set.
• The timer function can be combined with the
thermostat function.
• The timer function cannot be combined with the
schedule function. Activating the timer function
deactivates the schedule function.
7.4.1. Setting the turn on timer
NOTICE
• The product must be in standby mode to activate
this function.
1. Press and hold the timer button
seconds.
- The product makes a beep sound.
- Number "0" starts flashing on the display
along with the timer icon
2. Press the increase button
for 3
A
.
or the
T