OxCart GTM ATV Serie Mode D'emploi page 7

8
Insert the axles through the axle bushings. Secure each wheel with a washer and
cotter pin. Use pliers to bend cotter pins end to secure wheel. ***Optional spacer or
washers may be provided to increase space between tire & bed panels.***
9
First place Back Panel (Item 25) into Slide Bracket (Item 22). Next align Rails (Item 26 &
31) with Holes in Front/Back & Side Panels (Item 25 & 20) & Secure with Hardware
Provided
10
Insert the tow pin and secure with the hairpin cotter.
Assembly Instructions By Step
7