oneConcept 10031395 Mode D'emploi page 32

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Note:
You may scan your photo by placing it on the Photo Tray for scanning. You can also scan
directly from your photo album without removing the pictures from their holder.
If you see a black image on the LCD screen and do not see the image you want to scan,
please check that both switches are on the Photo setting. Please do not insert the film
holder into the scanner when scanning photo.
1. Brightness adjustment: the exposure of the scanner is set automatically. On some
occasions you need to adjust the brightness (exposure) of your subject.
Press the EV/Delete button to adjust exposure value.
Press up or down button to adjust the exposure compensation from +2EV to -2EV in 0.5
increments.
The amount of compensation is shown at the bottom of the LCD. Press the EV/Delete
button again to complete the setting.
32

Publicité

Table des Matières
loading

Table des Matières