mondaine 2nd Time Zone Mode D'emploi page 6

Setting a second time zone
First rotate the inner bezel with the upper crown ( ) until a city in the same time zone as your local time
zone appears (e.g. Central Europe = Paris).
Pull out the crown B to position 1. Rotate in an anticlockwise direction and set the silver hand on the
24-hour bezel to the local time.
ttention! The inner bezel has a 24-hour display. Therefore, when setting the local time, make sure that
8 a.m. is set as 08.00 and 8 p.m. is set as 20.00.
Now rotate the upper crown ( ) once more until a city in the desired time zone appears in the cut-out at
the top of the dial.
The fourth hand (the silver hand) now indicates the time for this time zone. This hand rotates once every
24 hours and indicates the time on the 24-hour display of the outer bezel.
Checking additional time zones
Once the watch has been set as described, you can check other time zones at any time by rotating the
upper crown ( ).
ttention! Please note that certain time zones do not recognize summer or winter time. You must take this
difference of +/- one hour into account when reading the second time zone or whenever you set the
second time zone (see table).