Float Menu; Settings Menu - Legamaster ETX Serie Manuel De L'utilisateur

E-screen
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5.3. FLOAT MENU

Er verschijnt een float menu wanneer u van de onderste
rand van het scherm naar boven veegt.

5.4. SETTINGS MENU

Hieronder vindt u een volledig overzicht van het instellingenmenu van de ETX-XX20 e-Screen, samen met een
uitleg van de instellingen.
MAIN SETTINGS
SETTING
CATEGORY
CATEGORY
Ethernet
NETWORK &
Wi-Fi
CONNECTED
DEVICES
Portable
hotspot
Bluetooth
DEVICE
Picture
LEVEL1
LEVEL2
MAC address
IP address
Ethernet
MAC address
IP address
Wi-Fi
Hotspot
Setup Wi-Fi hotspot
MAC address
Blooth
Picture mode
Power mode
Color tempreture
Eye protect
Anti blue light
Backlight
In dit drijfmenu zijn 3 actieknoppen te vinden
met de volgende functionaliteit:
Terug: brengt u terug naar het vorige
scherm
Home: brengt u terug naar het
startscherm van de Legamaster Launcher
Overzicht: Toont alle open apps en stelt
gebruikers in staat om snel tussen de apps
te wisselen, of om alle open apps in één
keer te sluiten.
VALUES
shows the MAC address for the wired connection
shows the IP address for the wired connection
Toggle ethernet-connection on / off for the screen itself.
ON/OFF
Disabling this does not disable ethernet for the OPS
shows the MAC address for the Wi-Fi connection
shows the IP address for the Wi-Fi connection
ON/OFF
Toggle Wi-Fi on and off
ON/OFF
Toggle the hotspot-functionality on / off
Set-up the hotspot
show the MAC address for the bluetooth adapter
Toggle bluetooth on/ off, show / connect with available
ON/OFF
devices
Standard
Dynamic
Select pre-set picture modes
Soft
Picture mode where settings can be adjusted manually in
User
‚Advanced'
User
Choose a power-mode: User = manual brightness
Auto
setting, Auto = Automatic brightness setting based on
Balanced
ambient light conditions, balanced = brightness 75, ECO
= brightness 50, DCR = 100. Power consumption varies
ECO Friendly
based on these settings.
DCR
Standard
Cool
Select a color temperature mode
Warm
Toggle Eye Protect mode on / off. When enabled, the
ON/OFF
brightness will be reduced when writing.
Toggle Anti blue light on / off. When enabled the amount
ON/OFF
of blue light will be reduced.
Manually adjust the brightness. Using this setting will
0-100
change the power mode setting to ‚Manual'
ETX-SERIES – GEBRUIKERSHANDLEIDING – NEDERLANDS
BEDIENING
EXPLANATION
99

Publicité

Table des Matières
loading

Table des Matières