Flymo C-Li 20V CGR Manuel D'utilisation page 5

EXTENSION CORDS
Do not use an extension cord unless it is absolutely necessary. Use of improper
extension cord could result in risk of fire, electric shock, or electrocution.
a WARNING: Do not touch the terminals of the plug when installing or
removing the plug from the extension cord.
When using an extension cord, be sure to use one heavy enough to carry the
current that your power tool will draw. An undersized extension cord will cause a
drop in line voltage resulting in loss of power and overheating.
a WARNING: Remove the battery pack from the product before charging.
CHECKING THE BATTERY PACK CAPACITY
Press the battery pack power level
indicator button (1). The lights will
illuminate according to the battery
pack's current power level.
80-100%
60-79%
30-59%
<30%
REMOVING THE BATTERY PACK
1. Press in and hold the battery pack release button (2).
2. Pull the battery pack out of the product.
OPERATION
Lights
3 Green Lights
2 Green Lights
1 Green Light
No lights
2
1
Battery Pack Power Level
80 –100%
60 – 79%
30 – 59%
Below 30%. Charge immediately.
5