All manuals and user guides at all-guides.com
Fax +32 030 9904733
• Upon first use, you should clean and wash the parts that will come in contact with food: see section
"Cleaning and Maintenance".
•
The bread may burn, always check the oven during roasting or grilling.
•
If any part of the product should catch fire, do not attempt to extinguish with water. Smother flames
with a damp cloth.
•
Be careful not to obstruct the air vents. Obstruction of the grids could cause the appliance to
overheat.
•
Disconnect the appliance and do not open the door To operate properly, the appliance must be
sufficiently ventilated with free space of at least 35 cm above, 10 cm behind and 20 cm at the sides.
•
The appliance must not be positioned immediately under a socket.
•
In the case of a breakdown or fault, switch off the appliance and have it checked by a professionally
qualified technician; repairs made by unqualified persons can be dangerous and render void the
warranty.
OPERATION
The oven can be regulated by means of the following elements:
-Thermostat (pos.4). Regulates the temperature of the oven; turn the knob to the desired temperature:
the heating element switches on, then off as soon as the temperature is reached.
Switch (pos.3). Selects the cooking mode; switches the upper and lower heating element on and off.
Settings:
=OFF
=Upper heating element: heats the upper part of the oven in particular
=Upper and lower heating element: heats uniformly
=Lower heating element: heats the lower part of the oven in particular
- Timer (pos.2) Regulates oven functions and the ventilation, signal lamp and intenal lighting; turn
the timer knob to the desired cooking time, after which the heating elements, ventilation, signal lamp
and internal lighting will switch off. The knob will turn gradually towards the "0" position, and when
it reaches "0", a buzzer sounds.
- Internal Convention: the hot air circulates in the oven cavity to brown and cook evenly, is active
when the timer is on.
The oven is provided also with the following accessories:
-
Tong to remove rack and plate (1)
-
shelf grid (7) that can be placed in one of the slots provided, removing the shelf grid by using the
appropriate handle
-
baking tray (8) that can be placed in one of the slots provided, removing the baking pan by using
the appropriate handle
-
enamel tray is properly attached underneath the lower heating element to prevent the surface
under the oven from overheating.
-
Internal light: is on when the timer function
-
Pilot light: is on when the timer function
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
11
Assembly page 11/36