Installation Guide; Important; Installing The Software; Connecting The Pc Oscilloscope To Your Pc - pico Technology Automotive Oscilloscope Diagnostic Kit Guide De Démarrage

Oscilloscope Diagnostics Kit Quick Start Guide
2

Installation Guide

IMPORTANT: Do not connect your PicoScope PC Oscilloscope to the PC before you have
installed the PicoScope software.
2.1

Installing the software

The PicoScope Automotive software has been designed to run on computers with
Windows XP SP2, Windows Vista and Windows 7.
1. Insert the Pico CD into your CD-ROM drive. If Autorun is enabled then the CD will
start up automatically, and you can go to step 5.
2. Click the Windows Start button.
3. Click "Computer" or "My Computer".
4. Click the icon for your CD or DVD drive.
5. Click the PicoScope Software button.
6. Click the Install PicoScope 6 button.
7. The program will guide you through the rest of the installation.
2.2

Connecting the PC Oscilloscope to your PC

From this point the software should already have been installed on the PC. If the
software hasn't already been installed then please follow the steps in 2.1 on Installing
the software.
Connect the USB connector on the PicoScope PC Oscilloscope to the USB port on the
computer. To minimise the risk of electromagnetic interference, please use the
USB cable provided. The light on the front of the oscilloscope should now be on or
flashing, showing that the unit has power.
2.3

Starting the application software

The Oscilloscope
Diagnostics Kit is supplied
with the PicoScope
application program. To
start PicoScope, simply click
the PicoScope icon in the
Pico Technology group in
the Start menu.
2
Pico Technology
PicoScope is our PC
Oscilloscope application
with added features for
Automotive Diagnostics.
DO155-3