13.6 Assembling the accessories
13.6.1
Water tank
13.6.2
Filter and filter pot
13.6.3
Teapot
caso TeeGourmet
The device can only be operated with teapot and filter pot.
Use the teapot (3) to pour the desired quantity of water into the
water tank (1). Pour the water slowly, making sure that all water
flows into the tank. Closing the lid too soon will lock the valve
and the remaining water cannot enter the tank. Pour at least 0.4
L, but no more than 1 L of water into the tank. Close the lid so
that it locks into place.
The lid must always remain closed while the water is being
heated!
Place the funnel (9) onto the filter (8). This makes it easier to
add the tea. Place the desired amount of tea in the filter (8).
Use the quantity recommended by the tea manufacturer.
Remove the funnel (9). Close the lid and insert the filter pot (2).
Close the lid and place the teapot (3) on the warming plate (6).
Always make sure that the lids are on the pots, before
operating the device.
Please note
Warning
Please note
Commissioning
40