Hardware Installation - Air Live VoIP-111A Guide D'installation Rapide

Hardware Installation

1. Setup LAN connection: connect an Ethernet cable
from ATA's LAN port to your computer's Ethernet port.
2. Setup WAN connection: connect an ethernet cable
from ATA's WAN port to your cable (xDSL) modem's
ethernet port
3. Setup Phone/PSTN connection: connect an RJ-11
cable from ATA's phone port to your analog phone or
PSTN line.
Setup the ATA by the Web
1. Please make sure your computer's network setting is DHCP mode (obtain IP address automatically).
2. Connect the ATA's power and LAN cable on the back.
3. Open your web browser and in the address field , input the following IP address "http://192.168.100.1":
English
4 VoIP-111A / 120A