How To Make A Phone Call - Air Live VoIP-111A Guide D'installation Rapide

NAT Trans-STUN setting
You can setup the STUN Enable/Disable and STUN
Server address in this page. This function can help
ATA working properly behind NAT. To change
these settings please follow your ITSP information.
When you have finished the setting, please click the
Submit and Save Change button on the left side.

How to make a phone call

When the ATA is configured properly, you can make a phone call to your friend in the same Service provider.
If you want to make a phone call, you can dial the phone number and press "#" button to start to dial the phone
number.
The ATA also provides some function that list as below:
1. Call Waiting: When a new call is coming while you are talking, you can push the Flash button to switch
to the new call. You can push the Flash button to switch between the two calls.
2. Call Hold: You can push the Hold key to hold the current call for a while, then push Hold key again to
keep talking.
3. 3-way conference: If you want to make 3-way conference call, you can make a phone call to the first
phone number. After the call is established, push the Flash button then you can hear the Dial tone, then
make a phone call to the second phone number. When the second call is established, press the Flash
button again.
English
8 VoIP-111A / 120A