Matco Tools MCS48V Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Matco warrants this tool for a period of 1 year from original purchase. We will repair any MCS48V covered
under this warranty which proves to be defective in material or workmanship during the warranty period.
In order to have your tool repaired, return the tool to Tri-County Power Tool, Inc. or Pneutool
Parts & Services Co. Ltd. at the address listed below, freight prepaid. Please include your name
and address, evidence of the purchase date, and description of the suspected defect. The tool
will be inspected and if any part or parts are found to be defective in material or workmanship,
the tool will be repaired free of charge and returned to you freight prepaid. This warranty does
not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and
does not cover any repairs or replacement made by anyone other than Matco, Tri-County
Power Tool, Inc. or Pneutool Parts & Services Co. Ltd. The foregoing obligation is Matco's sole
liability under this or any implied warranty and under no circumstances shall we be liable for any
incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state
to state.
MCS48V
MCS48V
MCS48V
MCS48V 4.8V CORDLESS SCREWDRIVER
FEATURES
• One hour fast charger and two heavy duty 4.8 volt batteries
• Spindle lock for manual operation up to 220 in-lb. One of the strongest
designs available in spindle locks
• Patented mechanism to change from straight type to pistol type
• Metal front clutch housing for increased durability
• Two-speed gear box with low and high speeds for greater versatility
• 16 position torque control to adjust to the application
MCS48V Limited Warranty:
TRI-COUNTY POWER TOOL, INC.
Cleveland, OH 44109
(866) 873-8278 (toll-free)
(216) 398-6121 (fax)
PNEUTOOL PARTS & SERVICES CO. LTD.
ON M9W 3A1 Canada
(888) 748-1201 (toll-free in Canada)
(416) 748-2695 (fax)
4597 Pearl Rd.
(216) 398-6120
33 Haas Road
Toronto
(416) 748-1200
5
5
07/27/0
07/27/0
6

Publicité

Table des Matières
loading

Table des Matières