Matco Tools MT2334 Mode D'emploi

LLAVE NEUMATICA DE IMPACTO DE 3/4"
IMPACT
CLÉ À PERCUSSION DE 3/4 PO
3
WRENCH
4
S P E C I F I C A T I O N S
Free Speed ................................................... 5600 RPM
Breakaway Torque .....................................1800 ft. lbs.
Maximum Torque .......................................1250 ft. lbs.
Air Inlet ........................................................... 3/8" NPT
Average Air Consumption ...............................5.8 cfm
Recommended Hose Size ............................... 1/2" I.D.
Net Weight ..................................................... 7.13 Lbs.
Overall Length ....................................................... 8.58"
Sound Pressure Level ...................................92.4 dBA
Vibration Level ......................................... 14.88 m/sec²
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID PROLONGED
EXPOSURE TO
VIBRATION
MT2334
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
WARNING
Copyright © Professional Tool Products, 2016
MT2334
• Operating Instructions
• Warning Information
• Parts Breakdown
All rights reserved.