T-Fal Beertender VB2158DI Mode D'emploi page 11

A new draught beer tube should be used with
A bag of 5 tubes is included with the BeerTender®
appliance. To order additional beer tubes, please
contact www.beertender.com or call 1-888-
Chilling the DraughtKeg
1. Before pouring a draught beer, it is very important that
the Heineken ® and Heineken Premium Light
DraughtKeg reach the correct temperature.
2. Ensure DraughtKeg is sufficiently chilled before
pouring a draught beer. Insufficiently chilled
DraughtKegs will produce too much foam. It is ideal to
purchase the DraughtKeg pre-chilled or pre-chill over
night before intended use. If the DraughtKeg needs
additional chilling, there are 2 recommended options:
a. Inside the BeerTender – Depending on the
temperature of the DraughtKeg, it will take up
to 18 hours to chill to the ideal serving
temperature.
b. In a refrigerator – Depending on the
temperature of your refrigerator, it will take up to
12 hours to chill to the ideal serving temperature.
Tip: We recommend that you always keep an extra
DraughtKeg in your refrigerator to always have a chilled
keg available.
Preparing the BeerTender
IMPORTANT: It is important that the BeerTender power
switch is turned on before inserting the DraughtKeg.
9
each DraughtKeg
HEINEKEN.
TM
®