Ninebot S-Max Manuel De L'utilisateur page 6

5 Charging
1. Lift up the
cover
Your S-Max is fully charged when the LED on the charger changes from red (charging) to green
(trickle charge).
WARNING
ONLY use the original charger, otherwise the battery will be damaged and there is a risk of fire. DO NOT use
wet or damaged batteries. DO NOT charge when the charge port or cable is wet.
Charge port
2. Open the 3. Insert the plug into the socket
rubber cap
* Charging the wrong way can cause vehicle
damage.
6 Before the First Ride
There are safety risks when learning to ride the S-Max. You must read the Safety Instructions and
follow the New Rider Tutorial in the App before your first ride.
For your safety, your S-Max is not activated at this time and will beep occasionally after Power ON.
Until activated, the S-Max maintains a very low riding speed and steering sensitivity. Install the App
on your mobile device (with Bluetooth 4.1 or above), connect to the S-Max with Bluetooth, and
follow the App instructions to activate your S-Max and follow the training procedures.
Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above).
Segway-Ninebot App
1
Install the App and register/login.
3
Click Vehicle > Search device to connect to your S-Max. The S-Max
will beep when the connection is successful. The Bluetooth icon will
stop blinking and remain illuminated.
2
Power ON the S-Max. The Bluetooth icon blinking indicates the S-Max
is waiting for a connection.
4
Switch the S-Max to Self-balancing mode on the App*. Follow the
prompts to watch the Riding Safety video, complete the New Rider
Tutorial, and then activate the S-Max.
* When the mode is switched successfully, you will hear two beeps.
Basic info and settings
Gokart mode