Team kalorik Venga VG BL 3009 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Fax +32 2 359 95 50
CAUTION
This product is equipped with a safety switch (A) on the base of the motor. If the
blade base is not assembled properly, the safety switch will not be activated and the
machine will not operate when the power is turned on.
Do not use any tools to press the safety switch in order to avoid causing damage.
Do not mix dry food only, the food must be mixed with water or other liquids.
After max 10 minutes of continuous operation of the device, it must be rested for at
least 5 minutes to avoid overheating.
Unplug the power cord.
Turn the blade counterclockwise to recover the bucket.
CLEANING AND MAINTENANCE
Always unplug the unit before cleaning it.
Cleaning the motor body: the motor body can be cleaned with a soft, damp cloth. Do
not immerse the motor base in water or any other liquid.
Dismantle the other parts after each use and wash them with soapy water. Then rinse with
clean water and dry thoroughly.
Only the motor base cannot be cleaned in the dishwasher. The other parts are dishwasher
safe as long as the temperature does not exceed 60
Dry the unit properly before storing it.
It is quite normal that plastic can be colored by food after a long period of use.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
5
Assembly page 5/30
VG BL 3009

Publicité

Table des Matières
loading

Table des Matières