Genie CB 800 Guide D'utilisation page 13

2. Push the binding spine onto the
bracket as shown.
If you want to provide a cover for the bound sheets of paper, please proceed as
follows:
 Begin by inserting the front cover, then the sheets of paper beginning with
the first sheet, and the rear cover at the end.
 Make sure the pages are facing downwards!
5. Place the perforated holes over the
tips of the rings as illustrated.
3. Slowly and carefully press down the lever until
the binding spine is unwound. The tips of the
rings must project slightly from the bracket.
4. In order to keep the lever in this
Position, press the locking catch.
13