7. FAQ
Problems
I cannot find the WiFi
network on my Smartphone
I am unable to link the
SMART TEMP module to my
home router
8. LINK TO INFORMATION ABOUT THE SMART TEMP APPLICATION
Page 16 on 16
Causes
SMART TEMP module
is off
LED 1 is off
Simple-WiFi network
cannot be found
Signal out of range
Connection failure
Wrong domestic network
name
Error in entering the
security key
Simple-WiFi signal out
of range
Filtering by MAC
address
Home WiFi network out
of range of the SMART
TEMP module
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
WIFI SmartTemp module
Solutions
Press the module's Start/Stop button for
2 seconds (section 4.1)
Check the module's 12 V power supply
(section
3.2)
Activate WiFi on your Smartphone
Move close to the module
Retry the connection several more times
Make sure you have the exact name
of the network and enter it (step 9 of
section 5) paying attention to capital
and lower-case letters
Re-enter the security key for your home
router step 11 of section 5.1 paying
attention to capital and lower-case
letters
Stay within range of the Simple-WiFi
signal until the end of step 13 in section
5.1
Enter the MAC address for the SMART
TEMP module (section 2) in your home
router and try linking again, section 5.1
Use a WiFi PLC or a WiFi repeater (not
included)
Use an extension cord (not included).
Contact your dealer