Safety Instructions - Ibx Orb-B Mode D'emploi

1. Safety Instructions

•
When working, wear the personal guard to avoid the risk from:
• Splashing liquids
• Broken glass containers
•
Follow the safety instructions, guidelines and accident prevention regulations.
•
Do not touch the running parts, moving instrument care not rolling your fingers.
•
Set up the instrument in a spacious area on a stable, clean, non-slip, dry and fireproof surface. Do not operate the
instrument in explosive atmospheres, with hazardous substances or under water.
•
If the instrument does not run smoothly, please decrease the motor speed.
•
Firmly secure the accessories and vessels in place to avoid damage or risk.
•
Preparation of samples may lead to dangerous flammable substances. Only process samples that will not react
dangerous.
•
Use the standard accessories listed in the "accessories" section, and follow the instructions to use accessories to ensure
safety. Please switch off the power before assembly of accessories, confirm the instrument and accessories are intact
before switch on each time.
•
The instrument can only be opened by an expert, please switch off before use.
•
The voltage stated on the nameplate must correspond to the mains voltage.
•
Do not cover the instrument during running. Prevent the collision and extrusion to instrument and accessories.
• Keep away from high magnetic field.
Warning!
•
Read the operating instructions carefully before
use.
•
Ensure that only trained staff works with the
instrument.
Protective ground contact!
•
Make sure that socket must be grounded
(protective ground contact) before use.
Table 1
3