Horton VMaster Instructions D'installation page 10

ENGLISH
Viscous Fan Drive Installation Instructions
For Toro Clutch 9900002
Tools Needed:
•
•
•
Vehicle Preparation
1. Turn the vehicle ignition off, apply the vehicle's
parking brake, and block the vehicle's wheels.
Use care to protect the radiator from damage during
the replacement of the fan drive.
2. Utilizing the 36 mm wrench, remove existing fan
drive currently on your vehicle.
May require removal of shroud and radiator. The
viscous fan clutch has a left hand thread.
3. Remove the fan from the fan drive
4. For best results, check and replace any worn belts.
5. Check fan for any damage and clean radiator prior
to installation.
10
3/8" Drive Torque Wrench
3/8" Drive Ratchet, Extension, and Metric
Sockets
36 mm Open-End Wrench
NOTE
NOTE