Motion Detection - Trevi DS 5000 Manuel De L'utilisateur

DS 5000
E n g l i s h
Auto display off: adjustment of the time after which the display switches off
automatically during recording (Off, 30 seconds, 1, 2 minutes)
Format: formatting of the memory card
Reset: resetting all values to the factory values
Version: firmware version

MOTION DETECTION

When the device detects moving objects, it starts recording. If there are no
movements for about 10 seconds, the device will stop recording and enter the
motion detection mode. The device will start recording again when it detects
any other movement.
To activate this function, in standby press the MENU button (2) and tick the
Motion Detection function.
SHOCK SENSOR
In video mode, if the machine suddenly brakes or is violently hit, the G-sensor will
activate to prevent the current video clip from being overwritten. In the settings
it is possible to completely deactivate it or choose the degree of sensitivity of the
sensor according to the three levels provided (high, medium, low).
SENTRY MODE
When the vehicle is parked with the engine off, this function allows the video
camera to record for 30 seconds following a strong vibration or impact suffered
by the vehicle. With this function active, the camera is powered by the internal
battery, make sure that it is charged.