Installation Of The Device - Trevi DS 5000 Manuel De L'utilisateur

DESCRIPTION
1. On / off and confirmation button
2. MENU button
3. Left / Up selection key
4. Right / down selection key
5. Windscreen suction cup attachment
point
6. Mini USB socket. PC connection /

INSTALLATION OF THE DEVICE

Clean the windshield thoroughly before installing the device.
1. With the vehicle turned off, connect the car power cable (supplied) to a vehicle
cigarette lighter socket.
2. Connect the other end of the power cable to the Mini USB socket (6) of the device.
3. Insert the support bracket into the slide (5) of the unit.
4. Press the suction cup of the support bracket onto the windscreen and secure
it by pressing the lever on the base of the suction cup in the direction of the
windscreen.
5. Adjust the correct position of the chamber and lock it by turning the ring nut
near the slide support (5) anticlockwise.
Note:
- The device must be mounted on the windshield as indicated above, the upside down or
E n g l i s h
Power supply 5V
7. Micro-SD housing
8. Reset button
9. Lens
10. Speaker
11. Lcd display
DS 5000
1A.