Cuda surgical LED-3000 Manuel D'utilisation page 5

Caution The proximal end tip of installed lightguides and accessories can become hot. Allow
end tips to cool before removing.
Caution The end user is responsible to verify the cable and port are correctly matched before
light guide insertion, otherwise cable or light source damage may occur.
Caution The LED-3000 is designed to work safely and optimally with Sunoptic Technologies
fused light guides. The end user should determine the risk of using non- Sunoptic Technologies
guides.
Caution If while in use there is a momentary power interruption the LED-3000 will shut-down
and automatically restart itself if the power switch remains in the ON position; however there may be a
restart delay as internal components reset for normal operation.
®
LIT195 CUDA Surgical
(English)
Rev. B
Date of Revision: 08/05/15
Page 5 of 69
®
light