Assembly And Initial Usage; Unpacking; Assembling The Transport Caddy; Connecting The Power Supply To The Caddy - baracuda S3 Robotic Manuel Du Propriétaire

ASSEMBLY AND INITIAL USAGE

UNPACKING

The packaging should contain the following items:
• S3 robotic cleaner
• Transport and storage caddy
• Power supply
• Hardware kit (includes four (4) nuts, four (4) bolts, two (2) self
tapping screws, two (2) small Phillips screws, two (2) weights,
and an Allen key).
• Owner's manual
Check that the unit has not been damaged during transport. If
you detect damage, contact Zodiac Pool Systems, Inc. at
800-822-7933 before using your S3 Robotic cleaner. In Canada,
call 1-888-647-4004.
To unpack S3 Robotic and it's components:
• Remove the small box that contains the power supply.
• Remove the handles (left and right) of the caddy, which are
located against one side of the box.
• Remove the cleaner from the box, taking care not to tangle the
cable in the caddy.
• Remove the lower portion of the caddy along with the upper and
lower cable hooks, power supply hook, cable hook flange, locking
plate, bolts and screws. Diagram 1.

ASSEMBLING THE TRANSPORT CADDY

• Insert the handles into the tubes on the lower portion of the caddy
and align the screw holes. The handles will form an inverted V
shape when standing behind the caddy.
• Position one (1) cable hook and cable hook flange over the
lower holes on the caddy tubes. Seat two (2) nuts in the cable
hook with the plastic portion facing outward. Insert two (2) bolts
through the flange and secure the nuts using the Allen key
provided. Do not overtighten. Secure a self tapping screw into
the hole on the lower side of the cable hook.
• Position the top cable hook and power supply hook over the
holes on the handle tubes. Secure the two (2) remaining nuts
and bolts and self tapping screw into the upper cable hook.
Do not over tighten. Diagram 2.
CONNECTING THE POWER SUPPLY
TO THE CADDY
• On front side of caddy, position the power supply handle over
the power supply hook.
• Slide the locking plate clips into the power supply hook
and secure the Phillips screws with a screwdriver.
4 5
Do not over tighten. Diagram 3.
Locking
Plate
Cable
Hooks
Power Supply
Hook
Cable
Hook
Flange
Upper
Power
Cable
Supply
Hook
Hook
Assembled
Transport
Caddy
Locking
Plate
Power
Supply
Hook
Power
Supply