Publicité
Les langues disponibles
Les langues disponibles
Programme 2:
Corresponds to programme 1 that was complemented by a moonlight shining constantly with 5%
power during the dark phase.
Programme 3:
Same as programme 2 but with 10% moonlight.
Programme 4:
Same as programme 3, but instead of constant moonlight a moon phase with 5%.
Programme 5:
Same as programme 3, but instead of constant moonlight a moon phase with 10%.
Programme 6:
Same as programme 2, plus cloud flying between 10:30 and 16:00 o'clock with 12 to 40% cloud
darkening.
Programme 7:
Same as programme 6, but with 5% moonlight.
Programme 8:
Same as programme 7, but with a moon phase of 5% (see Fig. 4).
Programme 9:
Without programming.
If there should be full moon on a certain day, this can only be adjusted at the clock (see chapter
4.2.1).
The programs can be changed by loading them with DimEdit, modify and then store them under
the same or a new name.
If the aquasunLED is connected to the computer via the USB cable provided, this will appear as
separate drive.
19
Publicité
