sauermann DBM 620 Guide De Démarrage Rapide page 2

Quick start guide
The DBM 620 air flow meter allows control and balancing of airflow
English
in air conditioning system. Operating temperature: -5 to +50 °C;
Protection: IP40
1 Unfold the required frame
2 Mount the frame with the hood
• The frame elastomer joint must be placed towards the outside.
•
Fix the strips before stretching the hood on the frame's corners. Do not tight fully the strips:
in order not to damage the hood cloth, it is recommended to adjust the strips tightening at
the end of the mounting.
•
Stretch the hood on the frame's corners.
Once the first mounting carried out, a complete disassembly is not necessary:
the frame assembly can be stored with the hood mounted on the base.
3 Mount the hood + frame assembly on the base
•
Check that the self-adhering trip to fix the hood on the base is not fixed.
• The transparent part must be oriented towards the user. The coloured
strip inside the hood is a visual mark: it must be placed on the opposite
side of the user. This coloured marked strip has to be positioned in
front of the arrow mark of the base. Position the frame's corners with
retaining stops towards the window side of the hood.
• Tighten and fix the self-adhering trip to fix the hood on the base.
4 Position the rods
•
Put the rods inside the hood. Place the rods on the dedicated receipt cups then adjust
them on the opposite corner of the hood.
•
Position the rods to cross on the transparent side of the hood and on the opposite side
of the transparent part.
• Adjust the strips tightening.
5 minutes
2 x 2' 610 x 610 mm
3.35 x 3.35' 1020 x 1020 mm
2.36 x 2.36' 720 x 720 mm
2.36 x 4.33' 720 x 1320 mm
1.38 x 4.99' 420 x 1520 mm
5 Insert the batteries in the module
• Remove the batteries cover (1).
•
Insert batteries* respecting carefully the polarity.
•
Replace the batteries cover.
• Connect the DBM 620 module on the base.
6 Download SmartKap App
• Flash the QR code to download SmartKap application on your
smartphone or tablet.
OR
• Write "SmartKap" in the search bar then validate.
•
Download SmartKap application by pressing its icon.
•
Follow your mobile device indications.
7 Connect the mobile device and the DBM 620 module
Bluetooth must be activated on the mobile device.
®
•
Switch on the DBM 620 module by pressing the housing module.
• Launch SmartKap application by pressing its icon.
• The application opens automatically in "Balometer" mode.
If required, select "Manometer" mode.
• Press "Connect a device" then "Search for devices".
• Press the line of the required device then "Connect".
8 Display measurements
In "Balometer" mode, select the air vent
type. Position the air flow meter thanks to
the animation explaining how to position
correctly the air flow meter on the air vent
then press "Close".
*4 alkaline batteries LR6 AA 1.5V
Google Play and the Google Play logo are trademarks of Google LLC. / App Store is a service mark of Apple Inc.
DISPONIBLE SUR
1
In "Manometer" mode, set the differential
pressure device, type and dimensions.
Position correctly the differential pressure
device on the required location then press
"Rec".