Product Summary; Operation Method - Klarstein 10009948 Mode D'emploi

When environment temperature no more than 40 degrees, relative humidity no more than 40%,
when is 20 degrees no more than 90%, height above sea level below 1000 meter work normal.
Made by professional enterprise of electric blanket, have domestic First-class production equipment,
adopt double-layer all circuitry Safe protection electric heat wires, have really realized that update to
the Safe, healthy, comfortable type from the ordinary cold-proof type:
1. Health and Environmental protection: Adopt the pollution-free electromagnetic radiation shield
technology; stop the injury of electromagnetic wave radiation to the human body.
2. comfortable and gratified: It adopts the multi-temperature adjustable control, breaks the traditional
electric blanket has limitations to the human body with only high and low two low grades, you can
choose the most comfortable temperature that fit yourself.
Every product has passed strict test and every index all reach the national standard such as
EN 60335-1:2002 and EN 60335-2-17:2002.
Lay the electric blanket flat on the bed. The end of no control is the Foot. Fix the four corners fasteners of
the electric blanket on the four corners of the bed or the mattress with the nonmetal belts, only spread
sheets or thin cotton-padded mattress on the blanket, so help to conduct heat and find whether the electric
blanket drape, lay the quilt flat on the sheet can use the electric blanket safely.
• General temperature adjustment: Plug power cord into an AC230v-50Hz wall outlet (do not
connect this appliance with DC) before bedtime. Push shift button to „3 position „, the power
indicator lamp glows, and the electric blanket begin to heat. Normally, preheat 30minutes, can
push shift button to „3, 2 or 1 position" according to need so as to keep sure temperature when
falling asleep, or to „0 position" and stop heating (the power indicator lamp goes out).
• Three – setting temperature controller adjustment: turn on the switch, the power indicator lamp
glows, put the knob to „3 position „, the electric blanket enter the high temperature heating
status, can sleep after heat 30 minutes, adjust the knob can select numerous temperature after
going to bed. You can adjust the temperature knob according to your need until you feel comfortable.
When the electric blanket runs, the control must uncover in the position easy to use , make sure not
to put under the quilt or the pillow, and are covered by other things, let alone close to other heating
source in case that the control is overheated and damaged , and cause the contingency.
Using environment

Product summary

Operation method

8