R O U B L E S H O Ot I N G - Vitamix FoodCycler FC50 Mode D'emploi

Note: If the FoodCycler bucket coating fades or chips this is not a defect. This cosmetic damage is a result of a hard material scraping along the bucket
coating during a cycle, but it will not affect the function of the unit.
If your unit is signalling a machine issue, DO NOT continue using your unit. Contact Vitamix Customer service for instructions.
Indicator lights and
On/Off
Power (On/Off symbol)
Drying
Grinding
Cooling
All lights
10
t
Flashing light(s) and audible
"beeps" (what it means)
Lid unlocked, sensor dislodged
If this light is flashing, it indicates
that the unit is overloaded. In this
case, unplug the unit and allow to
cool for at least 35 minutes before
opening the lid. Refer to page 11 for
instructions to help with determining
the cause of overload.
Machine issue
Machine issue
Machine issue

r o u b l e S h o ot I n g

Light remains on
(what it means and what to do next)
Not applicable
in drying cycle - no issue
in grinding cycle - no issue
in cooling cycle - no issue
Contact Vitamix Customer Service for instructions
Light not illuminated
(what it means and what to do next)
Standby mode - no action required
other than collecting food waste and
starting the processing modes.
No Power - (machine is not plugged in
and turned on). If plugged in, unplug
the unit, plug it in again. If problem
persists, contact Vitamix Customer
Service for instructions.
These lights won't be illuminated until
the machine is in these cycles. No
action required.